Xperia S, Acro S and Ion were released in 2012 and it has not been a long time since their release and they have got a CM10(Jellybean 4.1) Update by FXP, a Recognized Developer on XDA and they are fully stable and everything is working in it. They are ready for being used as Daily Drivers by all of you..

HERE'S A LIST OF WHAT IS WORKING IN THE ROM:

  • GSM
  • WiFi 
  • GPS
  • ANT/ANT+
  • Bluetooth
  • Camera
  • Front Camera
  • HDMI
  • NFC
  • Proximity sensor 
  • Accelerometer/Compass 
  • Led notification
  • Video playback/recording
  • Audio playback/recording
  • Sending/receiving SMS
  • Volume rockers change track and volume
  • Receiving/sending MMS (fix: turn data on)
  • Offline voice typing
  • Torch
  • Fm Radio
NOT WORKING?


  • Nothing....

REQUIREMENTS:

  • Bootloader Unlocked. If you have not unlocked it, then Follow this Guide by Sony or FXP.

Then you might have a question in your mind on How to Flash this. So Follow the Instructions and it will be Fine:
  • Download The ROM Below.
  • Put the downloaded zip in the root of your SD card
  • Switch off your phone:
  • Hold vol+ Button and plug usb to boot into fastboot (blue led)
  • fastboot flash boot boot.img (from cm10 zip)
  • fastboot reboot
  • Enter recovery, on boot led will be violet for 3 secs, During this period press vol+ Flash rom zip
  • Flash Gapps zip
  • Wipe
  • Reboot
DOWNLOAD:

  • Xperia S(nozomi) -  Here
  • Xperia Acro S(hikari)  - Here
  • Xperia Ion(aoba)  - Here

If you want to download without interruption at Full Speed, then download it here
And Select CM10, then FXP 219 and then your device codename.


  • Xperia S - nozomi
  • Xperia Acro S - hikari
  • Xperia Ion - aoba


CHANGELOG:

  • Nothing New


Post a Comment Blogger Disqus

  1. recording aint working for xperia S.. why??

    ReplyDelete
  2. XPERIA S JELLY BEAN UPDATE is Releasing in selected Countries : Check it out Here :http://www.cronose.com/xperia-s-jelly-bean-update-release-before-xperia-p/

    ReplyDelete
  3. working in a Acro s?

    ReplyDelete

 
Top